Email : [email protected]
Online consultation
If you have any needs, suggestions and comments on our products, please leave a message! I will reply to you as soon as I see the information. Thank you!

en 856 4sh/4sp wine

High pressure hoses - Hydrosila GROUP

High pressure hose EN 856 4SP. Four spiral high pressure hoses according to EN 856 4SP standard for hydraulic systems with a rated pressure up to 380 bar. Universal high pressure hoses for high pressure hydraulic systems. A long service life makes this hoses an excellent choice for a wide range of mobile machines. More (Learn More)

1.10 EN856 4SP/4SH - Orientflex

1.1 SAE 100 R1+EN 583 2SN 1.2 SAE 100 R2+EN 853 2SN 1.3 SAE 100 R3+R6 1.4 SAE 100 R4 1.5 SAE 100 R5+R14 1.6 SAE 100 R7+R8 1.7 SAE 100 R9+R10+R12 1.8 SAE 100 R13+R15 1.9 SAE 100 R17 1.10 EN856 4SP/4SH 1.11 Concrete Placement

Hydraulic Rubber Hose EN856 4SP - Industrial Hose and …

EN 856 4SP steel wire spiraled hydraulic hose is suitable for mine hydraulic support and the related equipment. The hose is resistant to flame and static. It is almost similar to EN 856 4SH steel wire spiraled hydraulic hose in structure, but it can bear higher working pressure than EN 856 4SH steel wire spiraled hydraulic hose under the same temperature.

Hydraulic Hose EN856 4SH 4SP, high pressure steel wire …

Steel Wire Spiral Hydraulic Hose EN856 4SH 4SP Hydraulic rubber hose Recommended For: Extremely high pressure and high impulse hydraulic appliions. This hose is the most flexible EN856 4SH hose in the industry with superior impulse performance (tested to 1,000,000 impulse cycles at bend radius lower than EN 856 Standard).

China High Impulse Hydraulic Hose DIN En 856 4sp/4sh - China …

China High Impulse Hydraulic Hose DIN En 856 4sp/4sh, Find details about China 4 Wire Hydraulic Hose, Hydraulic Hose from High Impulse Hydraulic Hose DIN En 856 4sp/4sh - Qingdao Hyrotech Rubber & Plastic Products Co., Ltd.

High Pressure Hydraulic Hose, 1SN, 2SN, 4SP, 4SH, R13 and R15

We can supply standard high pressure hydraulic hose including high-pressure hose EN 853 1SN, 2SN, 4SP, 4SH, SAE 100R13 and R15. They are used as flexible hoses in the hydraulic systems of machines and mechanisms for the transportation of mineral and hydraulic oil, fuel oil and water-oil emulsions. High pressure hydraulic hoses are also used in

High-Pressure ParLock Multispiral Hoses ISO 3862 - DIN EN 856 …

High-Pressure ParLock Multispiral Hoses ISO 3862 - DIN EN 856 TYPE 4SH - H29 - H29ST - H29TC Where To Buy Parker''s ParLock Multispiral Hoses H29, H29TC and H29ST are developed with the ParLock Interlock technology and for a working pressure of up to 43,0 MPa.

High pressure hoses - Hydrosila GROUP

High pressure hose EN 856 4SP. Four spiral high pressure hoses according to EN 856 4SP standard for hydraulic systems with a rated pressure up to 380 bar. Universal high pressure hoses for high pressure hydraulic systems. A long service life makes this hoses an excellent choice for a wide range of mobile machines. More (Learn More)

4 Wire Hydraulic Hose Service, Get good quality 4 Wire Hydraulic Hose …

En 856 4sh 4sp Four Layers Wire high pressure hydraulic hose for Industrial Machines 420 bar Cloth Surface 4 Wire Hydraulic Hose ID 3/8 - 2" SAE 100 R15 SAE 100 R15 High Pressure Hose , Four or Six High Tensile Wire flexible rubber hose ID 1 / 4" ~ 2

High-Pressure ParLock Multispiral Hoses ISO 3862 - DIN EN 856 Type 4SP …

Parker''s ParLock Multispiral Hoses H31, H31TC and H31ST are developed with the ParLock Interlock technology and for a working pressure of up to 50,0 MPa. This hose range offer an excellent solution for extremely dynamic pressure appliions.

High pressure hoses - Hydrosila GROUP

High pressure hose EN 856 4SP. Four spiral high pressure hoses according to EN 856 4SP standard for hydraulic systems with a rated pressure up to 380 bar. Universal high pressure hoses for high pressure hydraulic systems. A long service life makes this hoses an excellent choice for a wide range of mobile machines. More (Learn More)

Hydraulic Rubber Hose EN856 4SP - Industrial Hose and …

EN 856 4SP steel wire spiraled hydraulic hose is suitable for mine hydraulic support and the related equipment. The hose is resistant to flame and static. It is almost similar to EN 856 4SH steel wire spiraled hydraulic hose in structure, but it can bear higher working pressure than EN 856 4SH steel wire spiraled hydraulic hose under the same temperature.

EN 856 4SP Steel Wire Spiraled Hydraulic Hose

EN 856 4SP Steel Wire Spiraled Hydraulic Hose with Good Flame and Static Resistance EN 856 4SP steel wire spiraled hydraulic hose is suitable for mine hydraulic support and the related equipment. The hose is resistant to flame and static. It is almost similar to EN 856 4SH steel wire spiraled hydraulic hose in structure, but it can bear higher working pressure than EN 856 4SH steel wire

STANDARD SPIRAL HOSE | Vitillo

EN 856 4SP ISO 3862 4SP TEKNOSPIR /4SH 4 high tensile steel spirals Hose type: STANDARD SPIRAL HOSE Recommended for: Very High Pressure Hydraulic System Reference standards: EN 856 4SH ISO 3862 4SH TEKNOSPIR /15 4 high tensile steel

China High Impulse Hydraulic Hose DIN En 856 4sp/4sh - China …

China High Impulse Hydraulic Hose DIN En 856 4sp/4sh, Find details about China 4 Wire Hydraulic Hose, Hydraulic Hose from High Impulse Hydraulic Hose DIN En 856 4sp/4sh - Qingdao Hyrotech Rubber & Plastic Products Co., Ltd.

China Hose Assely DIN En 856 4sh/4sp SAE 100 R12/R13/R15 Wire Spiral Hydraulic Rubber Hose …

DIN EN 853 1SN, 2SN; EN 856 4SP, 4SH, EN 854 1TE 3. Flame resistant hose / Fire suppression hoses, Rotary drilling hose 4. Air / Water hose, Oil Hose, Water /Petroleum suction and discharge hoses, Slurry/mud /cement hose 5. Plastic Spiral Guard for

High-Pressure ParLock Multispiral Hoses ISO 3862 - DIN EN 856 Type 4SP …

Parker''s ParLock Multispiral Hoses H31, H31TC and H31ST are developed with the ParLock Interlock technology and for a working pressure of up to 50,0 MPa. This hose range offer an excellent solution for extremely dynamic pressure appliions.

Spiral Hoses Archives - Diesse Rubber

EXCEEDS EN 856 4SH DS-4SP EXCEEDS EN 856 4SP FIGHT 500 EXCEEDS SAE 100 R15 DIESSE RUBBER HOSES S.p.A. Via Provinciale, 8 – SP 155 – 24040 FILAGO (Bergamo) ITALIA VAT 03536260163 – Social Capital Eur 6.500.000 All rightsCredits

En 856 4sh DN32 High Pressure Hydraulic Rubber Hose for Mechanical Blade - China 4sp, 4sh …

En 856 4sh DN32 High Pressure Hydraulic Rubber Hose for Mechanical Blade, Find Details about 4sp, 4sh from En 856 4sh DN32 High Pressure Hydraulic Rubber Hose for Mechanical Blade - Hangzhou Paishun Rubber and Plastic Co., Ltd.

Hypress EN 856 4SP Hydraulic Hose

Hypress EN 856 4SP Hydraulic Hose Internal Hose Synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement Four steel wire braids. External Covering Synthetic rubber, resistant to oils, fuels and atmospheric conditions. -40 C to +100

1.10 EN856 4SP/4SH - Orientflex

1.1 SAE 100 R1+EN 583 2SN 1.2 SAE 100 R2+EN 853 2SN 1.3 SAE 100 R3+R6 1.4 SAE 100 R4 1.5 SAE 100 R5+R14 1.6 SAE 100 R7+R8 1.7 SAE 100 R9+R10+R12 1.8 SAE 100 R13+R15 1.9 SAE 100 R17 1.10 EN856 4SP/4SH 1.11 Concrete Placement

Hydraulic Hoses, Fittings and Equipment - Parker Hannifin

ISO 3862 Type 4SH – DIN EN 856 Type 4SH 701 No-Skive Multispiral ISO 3862 Type 4SP – DIN EN 856 Type 4SP Standard F42 No-Skive Multispiral For phosphate ester base fluids 774 …

EN 4SP Spiral Wire Hydraulic Hose for Extremely High Pressure

EN 856 4SP Steel Wire Spiraled Hydraulic Rubber Hose. SWHH-01: Four-spiral reinforcement layer of EN 856 4SP hydraulic hose. It is an extremely flexible hose designed to operate at high working pressures and finds its appliions on modern construction, marine, mining, and forestry equipment. This hose is available in long lengths up to 131 feet.

4SH hose data sheet - Hydraulic Offshore Supplies

DIN EN 856 4SH Hose Construction: Tube: oil resistant synthetic rubber Reinforcement: four high tensile steel wire spiral layers Cover: abrasion and weather resistant synthetic rubber Temperature Range: ‐40 C to +100 C (+120 C max) Hose I.D. I.D

EN 856 4SH Steel Wire Spiraled Hydraulic Hose

The details of EN 856 4SH steel wire spiraled hydraulic hose: Structure: it is composed of three parts: tube, reinforcement and cover. Tube: black synthetic rubber, making the hose resistant to abrasion, corrosion and oil. Reinforcement: four layers of high tensile and high strength spiraled steel wire, making the hose highly resistant to high pressure.

China High Impulse Hydraulic Hose DIN En 856 4sp/4sh - China …

China High Impulse Hydraulic Hose DIN En 856 4sp/4sh, Find details about China 4 Wire Hydraulic Hose, Hydraulic Hose from High Impulse Hydraulic Hose DIN En 856 4sp/4sh - Qingdao Hyrotech Rubber & Plastic Products Co., Ltd.

Copyright © 2018. Industrial Hose All rights reserved.sitemap